The S. v. Bassewitz GmbH & Co. KG is dealing with technologies for the future in the areas of cutting and forming. The aim is to create a link between the user and the scientist to find the adequate solution for our customers and to reduce production costs. As an example the High Speed Cutting may be cited:
The dry cutting or cutting with compressed air - as well as with minimum coolant quantity reduce the waste disposal cost of the chips (appr. 10 - 15% of the production costs)
Most modern coating technology like TiAlN, Balinit FUTURA NANO, Balinit X.CEED, Balinit ALCRONA (AlCrN) as well as nano-crystalline diamond (for graphite or nonferrous metals) result in extreme cutting efficiency and thereby reduce the main cutting and finishing time.
Machine concept for High Speed Cutting
To avoid geometric deformations and deviations in dimensions caused by heat, the hot swarf have to be removed from the working area as fast as possible by using the gravity as well the higher acceleration and chip deflection.
By using ultra fine micrograin carbide (average grain size 0,4 µm) our HSC-cutting tools get an extremely sharp edge finish. Maximum proportion of hardness and toughness as well as a high heat resistance facilitate an increased tool life and production security.
K. H. Flossbach GmbH
Werkzeuge Maschinen Industriebedarf
Gewerbegebiet Hämmern 1
D - 51688 Wipperfürth
Ansprechpartner: Herr Fred Flossbach
We are looking for a partner for England.
Mobilnr: +46 (0)70-537 50 98
Hjalmar Brantings Väg 11C
261 43 LANDSKRONA
NAKAO ABRASIVES CO. LTD.
Tel.: +81-3-39 620 461
Fax: +81-3-39 612 097
Contact : Mr. Hiroshi Nakao
T: +45 5616 9999